Get prices & info!

The HR115 horizontal resaw comes standard with more features and power for higher productivity up to 20 metres per minute. 

Quickly process cants up to 400 mm wide by 280 mm high into standard sized timber with the HR115. Maximum cutting height is 280 mm. Head height is adjusted electrically, and optional setworks are available. The variable belt speed is adjustable depending on the material being cut – up to 20 metres per minute. 

Two standard hold-down rollers keep cants steady during cutting. In-feed and out-feed roller tables, as well as a side roller table facilitate material handling, as well as returning uncut cants for another pass. To produce tapered products such as house siding, the head easily adjusts from 0° - 8°.


Electric Head Up/Down

Electric Head Up/Down
Standard electrical up/down increases operator productivity.

Variable Speed Conveyor

Variable Speed Conveyor
Adjust from 0-20 m per minute depending on material being cut.

Head Tilt

Head Tilt 0º-8º
Produce varied angled final products easily with the tilting head.

Cant Hold down Rollers

Cant Hold-down rollers
Keep cants stable during cutting.


Setworks option
Increase operator productivity with the precise Setworks option.

Cant Roller Table

Cant Roller Tables
The additional tables assist in returning cants through the resaw.



Standard 7.5 kW electric
Optional 11 kW electric
Cutting Capacity
Min. cant width 50 mm
Max. cant width 400 mm
Min. cant height 10 mm
Min. material length 700 mm
Max. material length Not limited.
(for longer material must be added additional support tables.)
Min. cutting height 6 mm
Max. cutting height 280 mm (front roller only)
180 mm (with additional back roller)
Resaw Features
Standard Electric blade start
Variable speed feed belt
Electric head up / down
Blade lubrication tank
Front hold-down roller
Back hold-down roller
Optional Setworks
In-feed and out-feed tables
Cant return side table
Belt Speed 0 - 20 m/min
Head tilt 0º - 8º
Length 4010 mm
Width 32-35 mm
Blade wheel diameter 483 mm
Resaw Requirements
Normal power usage EH11 - 9 kW/18 Amp;
EH15 - 12.5 kW/25 Amp;
Dust collection port size 100 mm

Latest Success Stories

Wood-Mizer’s dealer network in DRC expands

Wood-Mizer’s dealer network in DRC expands

A new Wood-Mizer branch in Lubumbashi and an upgraded dealership in Kinshasa builds Wood-Mizer’s capacity to service the sawmilling industry in the DRC better.