The TITAN 4 and TITAN 6 are our larger and most robust primary breakdown twin-vertical saws. Both models make use of the same heavy duty, automated infeed and outfeed systems, but differ in blade size and production capacity.

These models can handle a high throughput of small to medium diameter logs and a maximum log length of 6.6m

The main priority at this primary stage in the log breakdown process is to achieve equal open faces on the sawn cant. This allows for higher recovery down the line at the multirip or gang saw. Our TITAN Twinbands achieve equal open face cutting using a fast and accurate log loading system coupled with pressurised hold-down rollers and a spiky-feed chain.

KEY FEATURES:

• Feed speeds up to 40/60 m/min (TITAN 4/6)
• Compatible for blade sizes: 100 or 125 mm/150 mm (TITAN 4/6)
• Log diameters from 120 mm – 450 mm
• Automated log loading system onto the spiky chain
• Easy to use electric servo sizing control
• Robust design for harsh operating environments and high production rates
• 3 available length options to suit your requirements

T4 & T6-TBLT

TITAN 4 & TITAN 6 Twinbands (TITAN4 & TITAN6 TVS)

T4-TBLT Specification

 Head configuration Twin or Quad
 Min log diameter120mm
 Max log diameter 450mm
 Max log length3.3m or 4.5m or 6.6m (Feed length dependant)
 Min log length1.8m or 2.4m respectively
 Blade width 100mm or 125mm (4 inches or 5 inches)
 Blade kerf 2.5mm
 Main saw motors 22kW or 30kW (29.5HP or 40.2HP)
 Feed motor 4kW (3HP)
 Feed speed 0 - 40m/min (motor and blading dependant)
Electronic variable feed speed control
 Feed type Sharp chain
 Band wheel diameter 950mm
 Band wheel width 100mm
 Sizing method Ball screw
 Saw tensioning Hydraulic with spring
 Optional extras Overhead carriage for multiple pass functionality,
Additional outfeed hold downs,
63mm Narrow chain

T6-TBLT SPECIFICATION

 Head configuration Twin or Quad
 Min log diameter120mm
 Max log diameter 450mm
 Max log length3.3m or 4.5m or 6.6m (Feed length dependant)
 Min log length1.8m or 2.4m respectively
 Blade width 150mm (6 inches)
 Blade kerf 2.5mm
 Main saw motors 45kW or 55kW (60.3HP or 73.8HP)
 Feed motor 5.5kW (7.3HP)
 Feed speed 0 - 60m/min (motor and blading dependant)
Electronic variable feed speed control
 Feed type Sharp chain
 Band wheel diameter 1200mm
 Band wheel width 150mm
 Sizing method Ball screw
 Saw tensioning Hydraulic with spring
 Optional extras Overhead carriage for multiple pass functionality,
Additional outfeed hold downs,
63mm Narrow chain