The LT10 is the ideal affordable sawmill for low-volume or occasional timber processing. Woodworkers, farmers, furniture makers, and builders who want to save money by producing their own sawn timber from logs will find that the LT10 will exceed their expectations for an entry-level sawmill.
The LT10 cuts logs up to 70 cm in diameter and 5.4 m long with the standard bed. In order to cut longer logs, bed extensions can be added to extend the sawmill bed to any required cutting length. Thin-kerf blades require minimal energy consumption, so a 5.5 kW electric motor provides sufficient power to cut all wood types.
Logs are secured to the bed by the two standard log clamps and three adjustable backstops. The head height is precisely positioned by a hand crank and cutting is accomplished by steadily pushing the sawmill head along the length of the log with light pressure. Once the cut is completed, the head is raised, and then pulled back and lowered into position for the next cut.
A water tank feeds lubrication directly to the blade to improve cutting performance and keep the blade clean. The adjustable blade guide arm keeps the blade well-supported while cutting various sized material. Blade tension is easily adjusted, and keeps the blade at the proper tension for cutting.
Optional log loading ramps aid loading large logs with spring loaded brackets. Easily cut longer logs by adding additional bed extensions.
5.5 kW electric motor
Plenty of power for cutting and results in a low power bill.
Manual head positioning
Easily adjusts for precise board thickness with the manual crank.
Easy-to-operate system ensures correct blade tension.
Two log clamps
Secure logs and allow you to cut as low as 25 mm from the bed.
Mould & plane
By adding the MP100 moulding / planing head to the sawmill.
Electric head positioning
productivity, add the optional electric head up/down.